A desk tidy built around a 75 mm pad
The tray takes a 75 mm square note pad and curves up into a full-height pen holder. Two drawer towers flank it, four pen pockets and a scissors pocket sit along the front, a rear compartment runs the length of the back, and a thin needle strip extends the left side. Four drawers and three note stencils complete the set.
The housing defaults to 235.5 × 132 × 85 mm with 2 mm walls; the right tower is 47.575 mm high and the left 65.575 mm, with 18 mm and 27 mm drawer cavities. The 1.2 mm stencils match the pad exactly: they store in the slots under the tray or lie on the pad inside it, and their tabs span the spare slot depth so 7 mm stays outside when a stencil is pushed fully in.
Five Ø10.5 × 3.15 mm silicone feet fit the underside recesses — twelve millimetres in from each corner plus one centred — and the needle strip takes Ø5.4 mm bores 8 mm apart behind a 1.2 mm outer wall. Fit and clearances have not been physically verified and no load rating is established, so check that the drawers sit flush before filling them.