Your drawer, your layout.

Bambu A1

Select an insert to edit it. Select an empty cell to add one. Row 1 is at the front, below.

Loading model…

Drag to rotate · scroll to zoom

Make room for everything.

Use the clear inside measurements of your drawer.

Drawer & insert height

Selected insert

Insert type

Column Row Columns wide Rows deep

Grid, fit & printer

The A1 bed is 256 × 256 mm. A 250 mm usable area leaves a placement margin. Insert gaps are 0.4 mm; walls are 2.4 mm and floors 4 mm.

Download parts

Parts to download

Millimetres · one part per STL

Fit & assembly

The fit sample has two halves and a bow-tie key. Connector clearance sets the space around the key. Physical fit depends on manufacturing tolerances.

Trays and keys export flat; rim clips export on their side. Large inserts split automatically; the part names identify their insert, column and row.

Place sections on a flat surface and press the floor keys in from above. Keys sit slightly below the floor. Push the rim clips into the paired recesses to link neighbouring inserts. All insert rims stay at the same height.

The angled rack has three rising shelves; the cradle has three rounded channels. Leave clearance above the objects you store, as well as above the inserts.

Six insert types on one drawer grid

Inserts are arranged on a grid sized to your drawer: open trays, long channels, divided trays, small-parts grids, angled racks and rounded cradles. Anything larger than the usable print area splits into sections joined with recessed bow-tie keys, and neighbouring inserts link with flush rim clips so a full layout behaves as one piece.

The default drawer is 315 × 330 × 110 mm with 65 mm inserts, a 6 × 6 grid, 1 mm of clearance per side, a 0.4 mm gap between inserts and 0.2 mm of connector clearance. Usable print width is 250 mm, inside the 256 mm bed, and the walls are 2.4 mm with a 4 mm floor. The default layout comes to seven tray sections, two floor keys and nine rim clips, plus three sample pieces.

Sections and keys export flat and the clips export on their side. Join split sections on a flat surface, insert the floor keys from above, then press the clips over adjoining walls; the part names identify the insert and its section coordinates. Check the fit sample against the real drawer, and allow room above stored objects for the drawer to close.